P2BC2
Charge Air Cooler Coolant Pump A Supply Voltage Circuit
P2BC2 points to the power feed of charge air cooler pump A: the pump or its controller sees a supply that is missing or outside its working window. Typical causes are a blown fuse, a relay with burnt contacts, a broken or corroded feed or ground wire, or a water-damaged plug; a weak battery can contribute. No manufacturer documents P2BC2 publicly. Ford's 2024 OBD summary shows the same fault type on its smart auxiliary coolant pumps: the pump driver flags a supply outside its permitted range (P2B9D for pump A), checked continuously from 11 V battery voltage and logged after five seconds. CARB requires charge air cooler systems and their electrical components to be monitored. Without a proper supply the pump stops, the charge air warms up and the engine may limit power. A pump that is powered but blocked is P2BC1.
Possible causes
- Blown fuse or faulty relay in the pump feed high
- Broken or corroded supply or ground wire medium
- Water ingress or corrosion in the pump connector medium
- Weak battery or charging fault low
Symptoms
- Check engine light or engine warning message
- Pump does not run, charge air temperature rises
- Reduced power in hot conditions or under load
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2BC2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.