P2BBB
Turbocharger/Supercharger Bypass Valve A Position Sensor Circuit
P2BBB is the general fault of the position feedback from bypass valve A, the electrically driven valve that lets boosted air flow back from the compressor outlet to its inlet when the throttle closes or boost has to be trimmed. It is not the wastegate on the exhaust side. The engine module reads the sensor as a share of its 5 V reference; this code covers an open line or a signal it cannot sort into low or high. GM's 2019 tables for the supercharged 6.2-litre LT5 (Corvette ZR1) watch this sensor but publish only the low and high codes P2BBC and P2BBD; no manufacturer documents P2BBB itself publicly. An Achates Power patent explains why the feedback matters: without a valid position the commanded opening cannot be verified and boost control loses accuracy. Expect a warning light and reduced boost.
Possible causes
- Loose, corroded or unplugged connector at the bypass valve position sensor high
- Chafed or broken signal, reference or ground wire in the harness near the compressor medium
- Internal fault of the position sensor in the valve actuator medium
- Faulty sensor input or 5 V reference inside the engine control module low
Symptoms
- Check engine light
- Reduced boost and noticeably less power
- Whoosh or flutter noise when lifting off the throttle
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BBB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.