P2BBA
Engine Coolant Temperature Sensor 6 Circuit Intermittent/Erratic
P2BBA catches short dropouts or spikes in the sixth coolant sensor signal that never last long enough to count as a steady low or high fault. GM includes it in its 2019 L3B/common ECM tables (19OBDG03D) and in the 2025 edition (25OBDG03B): based on the last reading and the sensor time constant, the software allows only a limited change per sample, and if the signal leaps past that window for 5 s within 6 s the code is stored as Type B with the MIL on the second trip. The check pauses while P2BB8 or P2BB9 are active. GM bulletin 21-NA-149 lists P2BBA among the codes from chafed engine harnesses on 2019–2021 Silverado and Sierra 1500. Moving the harness during a live-data check usually reveals the spot; replacing the sensor alone rarely helps.
Possible causes
- Chafed engine harness with intermittent contact high
- Loose or corroded terminal at sensor 6 or the ECM high
- Sensor element with intermittent internal break low
Symptoms
- MIL on after two trips, may go out again
- Sensor 6 value jumps in live data
- Other harness-related codes stored at the same time
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2BBA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.