P2BB8
Engine Coolant Temperature Sensor 6 Circuit Low
Coolant sensors are NTC thermistors, so a low signal from sensor 6 means a very small resistance that the ECM would have to read as extreme heat; in practice a signal wire touching ground or a shorted element. GM sets P2BB8 when the sixth coolant channel drops below 47.5 Ω in its 2019 L3B/common tables (19OBDG03D) or 55 Ω in the 2025 ECM tables (25OBDG03B), both roughly equal to 150 °C, if that persists for 5 of any 6 seconds; the fault is Type B, so the MIL comes on after the second trip. GM bulletin 21-NA-149 includes P2BB8 in the long list of codes caused by chafed engine harnesses on 2019–2021 light-duty pickups. Expect the cooling fans to run hard as a safeguard. If the same sensor's line is broken or touches battery voltage, P2BB9 is stored instead.
Possible causes
- Sensor 6 signal wire shorted to ground, e.g. chafed harness high
- Internally shorted sensor element medium
- Moisture or coolant in the connector bridging the pins low
Symptoms
- MIL on after two trips
- Sensor 6 shows an implausibly high temperature
- Radiator fans running at high speed
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2BB8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.