P2BB6
Engine Coolant Temperature Sensor 6 Circuit
P2BB6 is the general circuit code for a sixth coolant temperature sensor, intended for control units that only know that the circuit is faulty and do not distinguish a grounded from an open or shorted-high line. Six or more coolant sensors appear on engines with split cooling, rotary coolant valves or separate branches for head, block, radiator and heater; which physical sensor gets number 6 is the manufacturer's decision. No manufacturer documents P2BB6 publicly. GM does read a sixth coolant channel in its 2019 and 2025 ECM tables, but reports its faults only through the specific codes P2BB8 and P2BB9. Under CARB rules each coolant temperature input must be tested for broken circuits and for readings beyond its plausible span. Unplugged connectors and broken leads are the likely reasons.
Possible causes
- Sensor 6 connector unplugged, damaged or corroded high
- Open or shorted wire between sensor 6 and the ECM medium
- Failed NTC element in sensor 6 medium
Symptoms
- MIL on
- Sensor 6 shows a fixed substitute or implausible value
- Fans may run continuously as a precaution
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2BB6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.