P2BB4
Engine Coolant Temperature Sensor 4 Circuit Intermittent/Erratic
This code covers jumps in the signal of the fourth coolant temperature sensor that coolant cannot physically make. GM explains the method in the 2019 edition of its engine tables for the L3B and related engines (19OBDG03D): from each reading and the sensor's time constant the software predicts an upper and a lower bound for the next sample, and a step beyond either counts as erratic; 5 s of failures inside a 6 s window set the code as Type B, MIL on the second trip, and it stays blocked while a hard circuit low/high fault is present. P2BB4 itself is missing from the 2025 tables. GM bulletin 21-NA-149 names it among the effects of a chafed engine harness on 2019–2021 GM light-duty trucks. A loose terminal is the classic cause; steady open or short faults are P2AFE and P2AFF.
Possible causes
- Loose or corroded terminal at the sensor 4 connector high
- Engine harness chafed, wire making intermittent contact high
- Internal intermittent break in the sensor element medium
Symptoms
- MIL on after two drives
- Jumping temperature value in live data
- Cooling fans or thermal management reacting erratically
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2BB4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.