OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BB2

Alternative Fuel Tank Empty

P2BB2 reports that the tank for the second fuel, mostly CNG or LPG, has been drawn down to its usable minimum. It is a status message rather than a component fault: a bi-fuel vehicle simply goes back to petrol. GM's bulletins for its bi-fuel models show the logic: the ECM derives the gas level from the tank pressure sensor, the 2013 Silverado and Sierra 2500HD gauge reads empty at roughly 500 psi and the 2015 Impala at about 400 psi, and when the gas is used up the engine changes to petrol on its own; GM's documents name no DTC for this step. No maker documents P2BB2 openly. If it appears with a full tank, suspect the tank pressure or level sensor (P019E, P01AF) or a closed tank shutoff valve (P224C). CARB treats such engines as alternate-fueled vehicles.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / B2

Possible causes

  • Gas tank actually used up to its reserve high
  • Tank pressure or level sensor reading too low medium
  • Tank shutoff valve closed or not opening low

Symptoms

  • Engine runs on petrol only, gas mode cannot be selected
  • Gas gauge shows empty or low-level warning

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2BB2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication