P2BAD
NOx Exceedence - Root Cause Unknown
P2BAD is the catch-all of the series: NOx after the SCR is measured too high, yet none of the specific causes from P2BA6 to P2BAC can be pinned down. GM uses it on the 2014 Duramax 6.6 L LML as Exhaust NOx Concentration High - Unknown Reason: the measured SCR efficiency, minus an offset-corrected model value, is filtered over time and fails once the difference drops below zero, with both NOx sensors active for over 60 s; Type A. GM PIP5007 notes that from 2012 this code takes over from P20EE/P207F as the diagnostic path when the DIC reports poor fluid quality. Nissan lists it as NOx Concentration Exceeded for the 2016 Titan XD with the Cummins 5.0 L and fixes it by reflashing the ECM. Diagnosis starts with DEF quality, dosing and sensors.
Possible causes
- Poor DEF quality or partly blocked dosing without a specific code high
- Aged or deposit-covered SCR catalyst medium
- Upstream or downstream NOx sensor drifting medium
- Engine control software needing an update (Nissan Titan XD) medium
Symptoms
- Exhaust fluid quality poor or emission warning
- MIL on after the first failed run
- Speed limit countdown if the condition persists
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2BAD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.