OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BA7

NOx Exceedence - Empty Reagent Tank

P2BA7 records that NOx control has been lost because the DEF or AdBlue tank has run dry, so no reagent can be dosed. Regulation (EU) 2017/1151 Annex XVI requires a level warning no later than 2,400 km ahead of an empty tank and an inducement that keeps the vehicle from operating with an empty tank, typically by blocking the next engine start after a countdown. CARB 13 CCR 1968.2 (f)(2.2.3)(B) asks for an empty-reagent diagnosis but exempts makers whose inducement prevents running dry. Ford lists P2BA7 in its 2014 code interpretation table; no public document gives a threshold. The normal level code is P203F; P2BA7 is the consequence once the tank is empty. Refilling with enough fluid usually clears warning and limits.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / A7

Possible causes

  • DEF tank simply not refilled despite level warnings high
  • Level sensor reading empty although fluid is present (fault, ice, deposits) medium
  • Leaking DEF tank or line emptying the system low
  • Only a small amount refilled, below the quantity the system needs to recognise a refill low

Symptoms

  • DEF empty message with restart countdown
  • Engine will not restart once countdown expires
  • MIL or emission warning on

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2BA7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication