P2BA3
Starter/Generator Mechanical Performance
P2BA3 concerns the belt-driven starter-generator of mild-hybrid and stop-start engines: the controller has concluded that the machine does not turn the crankshaft or take torque from it as it should, although its electrics seem healthy. The exact detection rule is not published. FCA used the code on 2020 RAM 1500 and Jeep Wrangler 3.6 L eTorque models (bulletins 09-008-20 and 09-007-20), together with P0A92, after a batch of hydraulic belt tensioners let the belt slip; drivers saw the MIL and a flat battery. Audi lists P2BA300 for noisy or thrown belts on A4, A5, A6 and Q5 models and for squealing restarts on its 4.0 L V8 cars, where the generator itself was found intact and the tensioner damper is to be checked. Electrical faults of the machine have their own codes such as P2DC7.
Possible causes
- Weak or defective belt tensioner or tensioner damper letting the belt slip high
- Worn, misaligned or thrown poly-V belt high
- Damaged idler or tensioner rollers medium
- Mechanical damage in the starter-generator (bearing, pulley) low
Symptoms
- Squealing, chirping or grinding from the belt drive, often at start
- Engine fails to restart after an automatic stop
- Battery runs flat because the machine no longer charges
- Electrical system warning or MIL on the instrument panel
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BA3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.