OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BA0

Coolant Pump C Underspeed

P2BA0 reports that coolant pump C does not reach its speed. GM names the code Low Temperature Coolant Loop Pump Underspeed in its diesel ECM tables and treats it as a low out-of-range speed reading: in 2020 (20OBDG04) the printed limit is below -100 rpm in 5 of 8 one-second samples, in 2025 (25OBDG04A) below -50 rpm in 4 of 5; enable conditions are an active pump, 11 V or more at the relay and no cranking. Type B, so the lamp waits for a second faulty trip. Bulletin 21-NA-149 lists P2BA0 among the many codes caused by a chafed engine harness on the 3.0-litre LM2 Duramax in 2021 trucks and SUVs, next to P2C48 for the same pump. Besides wiring, a stuck or worn pump and air in the loop are suspects. Pump B is P2B9F, pump D P2BA1.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / A0

Possible causes

  • Engine harness chafed against brackets, shorting pump circuits high
  • Worn or partly seized low-temperature loop pump medium
  • Air or low coolant in the low-temperature loop low
  • Low supply voltage at the pump relay low

Symptoms

  • Check engine light after the second faulty trip
  • Parts on the low-temperature loop cooled less, reduced power possible
  • Further electrical codes when the harness is damaged

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BA0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication