OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B9E

Coolant Pump A Control Module Overtemperature

P2B9E is raised by the electronics built into coolant pump A when their temperature gets too high; the pump then derates or shuts down to protect itself. Ford's 2024 OBD summary for gasoline engines lists it as fault type 98 (system over temperature) of the cabin-heating auxiliary pump, monitored continuously once the battery supplies 11 V or more. The drive stage is usually cooled by the coolant it moves, so heat builds up when the pump runs dry or partly in air, when a stiff impeller makes the motor work harder, or when the pump sits close to hot exhaust parts; an ageing power stage can add to it. Check level and bleeding first, then free rotation. Pump B has P2B64, pump D P2B6B. Air alone often shows as P2B86 first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 9E

Possible causes

  • Low coolant or air at the pump, so the electronics lose cooling high
  • Stiff bearing or impeller raising motor load medium
  • Heat from nearby exhaust parts or damaged heat shield low
  • Ageing power stage in the pump electronics low

Symptoms

  • Cabin heat drops off after some time of driving
  • Check engine light
  • Pump stops and restarts after cooling down

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B9E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication