OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B9D

Coolant Pump A Supply Voltage Circuit

P2B9D means the power feed of coolant pump A is outside its usable range, as opposed to the command line covered by P2600 to P2603. Ford names it in the 2024 gasoline OBD summary as fault type 1C (feed voltage outside its window) of the cabin-heating auxiliary pump, monitored all the time from 11 V battery voltage with a 5-second window. Since these pumps carry their own electronics, they measure the voltage on their supply pin and report the deviation. Look for a blown fuse, a relay with burnt contacts, corrosion in the plug, a bad ground strap or a weak battery; a voltage-drop test with the pump running finds hidden resistance best. CARB 13 CCR 1968.2 (e)(15) demands monitoring of such outputs. The same fault on pump B is P2B62, on pump D P2B69.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 9D

Possible causes

  • Blown fuse or faulty relay in the pump supply high
  • Corroded connector or poor ground at the pump medium
  • Weak battery or charging system voltage too low medium
  • Chafed or broken supply wire low

Symptoms

  • Cabin heat weak or missing
  • Check engine light
  • Fault comes and goes with battery condition or electrical load

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2B9D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication