OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B97

Exhaust Pressure Control Valve A Position Exceeded Learning Limit

P2B97 concerns the electrically driven exhaust back-pressure flap of GM's 3.0-litre Duramax diesel. After key-off the module moves the flap to its fully closed and fully open stops and stores what the SENT position sensor reports there. GM's 2025 table 25OBDG04B flags a learned value outside its window: closed below 4.8 % or above 14.7 % of 5 V, wide open below 80 % or above 96.5 %, enabled with coolant 30–150 °C and at least 9.5 V; Type A, MIL after one trip, no debounce. GM preliminary information PIP5874B for 2023 Silverado/Sierra with the 3.0 l LZ0 restricts the replacement part and asks for a borescope look at flap travel and welding slag before the valve is changed. P2B98 and P2B99 cover supply and driver faults, P0476 the general function check.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 97

Possible causes

  • Flap travel blocked by welding slag, soot or corrosion high
  • Position sensor in the actuator drifted medium
  • Actuator gear or motor worn so the stops are not reached medium
  • Weak battery during the key-off learn low

Symptoms

  • Check engine light after one drive
  • Slower warm-up or reduced exhaust heating for aftertreatment
  • Possibly reduced engine power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2B97

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication