OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B96

Injection Pulse Performance

P2B96 is the engine-wide check, outside the cold-start phase, that injectors on a direct-injection petrol engine really open when commanded. The module digitises the voltage across each injector and looks for the small kink the moving armature leaves; if commanded pulses repeatedly show no opening, it assumes fuel was not delivered. GM's 25OBDG03A table runs this continuously in 100 ms steps as a global missing-pulse test beside the per-cylinder codes P2B00 to P2B07, Type B. GM's PIT5677 lists P2B96 among codes from chafed engine harnesses on 2019 Silverado/Sierra 1500 with the 2.7 l L3B, and the Encore GX/Trailblazer service update A202310450 cures it with ECM software. Mitsubishi files P2B96 under the injection system in its 2022 Outlander manual update. P2B95 covers the cold-start phase.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 96

Possible causes

  • Engine harness chafed against underhood parts (GM 2.7 l L3B) medium
  • Engine software detecting falsely, fixed by reprogramming medium
  • Injector armature sticking or injector worn medium
  • High resistance in an injector circuit or connector low

Symptoms

  • Check engine light after two drives with the fault
  • Misfire or rough running if fuel is really missing
  • Often other codes from the same harness or injector fault

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2B96

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication