P2B94
Wastegate Position Sensor B Exceeded Learning Limit
P2B94 is set when the learned end position of electric wastegate B falls outside the window the engine computer accepts. Stellantis documents it on the 2025 Ram 1500 with the 3.0L Hurricane twin-turbo: bulletin 09-008-25 (Rev. B) lists P2B94 together with P0248 and a MIL, with weak turbo response, caused by wastegate rod retention clips installed incorrectly at the factory. The fix is to measure the clips with a caliper and replace any that exceed 13.70 mm on the actuator side or 17.78 mm on the housing side. Ford's patent US9243553B2 explains the principle behind the learn step: the controller moves the valve against a mechanical stop and stores the sensor value there, so play in the linkage moves the learned point. Side A uses P2B93.
Possible causes
- Wastegate rod retention clips incorrectly installed (Stellantis 09-008-25) high
- Play or bending in the wastegate B linkage medium
- Charger or actuator B replaced without completed relearn low
Symptoms
- MIL on, often together with P0248
- Lack of acceleration from the turbo
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B94
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.