OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B93

Wastegate Position Sensor A Exceeded Learning Limit

P2B93 concerns the learned closed position of electric wastegate A. The computer periodically drives the valve onto its seat and stores the sensor value found there; Ford's patent US9243553B2 explains why: linkage length drifts with temperature and the reference must be refreshed. GM documents the code for the 2.7L L3B (19OBDG03D) and in the 2025 table 25OBDG03B: it fails when the raw closed position learned is above 85 %, or when no valid closed position has ever been learned while the engine runs above 1000 rpm with a stable valve and coolant at least 80 degrees Celsius. It is Type A with one trip. The usual reasons are a worn seat, a bent or stretched linkage or a replaced charger not yet adapted; this differs from P2B81, which judges how the valve follows.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 93

Possible causes

  • Wastegate linkage bent, stretched or wrongly adjusted high
  • Wastegate flap or seat worn so the valve travels too far medium
  • Turbocharger or actuator replaced and relearn not completed medium

Symptoms

  • MIL in the first trip
  • Boost slightly low because the valve does not fully close

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2B93

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication