P2B91
Turbocharger/Supercharger B Temperature Sensor Circuit High
P2B91 is stored when temperature sensor B delivers a signal above its permitted window. By far the most frequent reason is a broken current path: an unplugged or corroded connector, a cracked wire or an element that has burned open, which pulls the input up to its reference voltage. A short to the 5 V supply or to battery voltage has the same effect. For an NTC part this looks like severe cold, for a platinum resistor like severe heat; the sensor patent US8328419B2 from Heraeus explains why lead strain and heat cycling make such breaks a known weak point. No manufacturer publishes this code. Per CARB 13 CCR 1968.2 (e)(15) it is kept separate from the low fault P2B90 and the general circuit code P2B8F. Sensor A uses P2B70.
Possible causes
- Signal or ground wire open, connector unplugged or corroded high
- Sensor element or its lead wires broken by heat cycling medium
- Signal wire shorted to the 5 V reference or battery voltage low
Symptoms
- Warning lamp with stored code
- Sensor B stuck at an end value in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B91
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.