OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B90

Turbocharger/Supercharger B Temperature Sensor Circuit Low

P2B90 means the signal of temperature sensor B has dropped below the lowest value the engine computer accepts. What that says about temperature depends on the element: an NTC thermistor loses resistance when hot, so a low signal reads as extreme heat, whereas a platinum resistor of the kind Heraeus patented for turbo protection (US8328419B2) gains resistance with heat, so a low signal reads as extreme cold. Electrically both point the same way: a signal wire touching ground or a shorted element. No manufacturer publishes this code, so the sensor type of a given engine must be taken from its service data. CARB 13 CCR 1968.2 (e)(15) keeps low and high faults apart. The high counterpart is P2B91, the matching code for sensor A is P2B6F.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 90

Possible causes

  • Signal wire shorted to ground, for example melted insulation high
  • Sensor element shorted internally medium
  • Faulty input stage in the engine computer low

Symptoms

  • Warning lamp with stored code
  • Sensor B shows a fixed extreme value even on a cold engine

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B90

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication