OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B8F

Turbocharger/Supercharger B Temperature Sensor Circuit

P2B8F is the general circuit fault for temperature sensor B, the second sensor of this kind on a charged engine, often belonging to a second turbocharger. Which spot it watches is left to the manufacturer, and none documents this code publicly. The engine computer sets it when the signal is lost or unusable without clearly sitting below or above its range, for example during short interruptions. Sensors near the exhaust side often use a platinum measuring resistor on a mineral-insulated lead, as Heraeus describes in patent US8328419B2, because ordinary NTC parts reach their limit at about 900 degrees Celsius. CARB 13 CCR 1968.2 (e)(15) requires circuit monitoring of such inputs. Out-of-range codes are P2B90 and P2B91; sensor A has P2B6E.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 8F

Possible causes

  • Loose or heat-damaged connector with intermittent contact high
  • Wiring chafed or brittle near hot exhaust parts medium
  • Temperature sensor B failed internally medium

Symptoms

  • Warning lamp with stored code
  • Sensor B value missing or jumping in live data

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B8F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication