P2B8A
Intake Air O2 Sensor Circuit High Voltage Bank 1
P2B8A is the mirror image of P2B89: the bank 1 intake oxygen sensor delivers a voltage above its valid window. On a wide-band element this usually comes from a signal wire touching a supply or the heater feed, from an open ground or reference return that lets the input float upward, or from water inside the connector. A value that high would mean more oxygen than fresh air can hold, so the module cannot derive EGR dilution from it and falls back to a model or stops recirculation. No manufacturer publishes P2B8A. Ford's patent DE102014220034A1 learns the sensor's zero point while no exhaust is recirculated, the reference against which an implausibly high reading stands out; US8775011B2 separates sensor faults from a leaking EGR valve. P2B89 is the low side, P2B88 the general circuit fault.
Possible causes
- Signal wire shorted to a supply or to the heater feed medium
- Open ground or reference return lead of the sensor medium
- Water in the sensor connector medium
- Internal sensor fault low
Symptoms
- Check engine light on
- EGR switched off, possibly slightly higher fuel consumption
- Intake oxygen reading on the scan tool above the fresh-air value
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2B8A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.