P2B88
Intake Air O2 Sensor Circuit Bank 1
P2B88 is the catch-all electrical code for the oxygen sensor that some turbocharged engines mount in the intake tract, behind compressor and charge air cooler, to judge how much exhaust the recirculation system is feeding back. Ford's patents describe this intake sensor as a heated wide-band element whose pumping current shrinks as recirculated gas dilutes the fresh charge. P2B88 is meant for a signal fault the module cannot sort into too low or too high, such as an open lead or a reading that keeps dropping out. No manufacturer documents P2B88 publicly; CARB requires every input used for emission control to be checked for circuit faults. Without the signal, EGR runs on a model or is switched off. P2B89 and P2B8A split the fault by voltage, heater faults are P2B8B to P2B8E.
Possible causes
- Corroded or loose sensor plug, often wetted by charge air cooler condensate high
- Open or chafed signal wire between sensor and engine module medium
- Intake oxygen sensor element internally failed medium
- Fault in the sensor input stage of the engine module low
Symptoms
- Check engine light on
- EGR reduced or switched off, with slightly higher fuel use or knock-limited power
- Often no noticeable change in driving behaviour
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2B88
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.