OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B87

Coolant Pump A Underspeed

With P2B87 the reported speed of coolant pump A stays below the commanded one. GM's 2025 tables (25OBDG03A, 25OBDG04B) compare filtered command and feedback against a calibrated limit while 300–3,480 rpm is requested and more than 11 V is present; 8 s in a 10 s window, Type B. Ford's 2024 gasoline summary lists it as the underspeed type of the cabin-heating auxiliary pump, checked continuously from 11 V. On GM vehicles the code often had no hardware cause: PIT5789 (2021 Tahoe, Suburban, Yukon, Escalade) cured it with new BCM software, bulletin 21-NA-024 (2021–2022 Acadia, Blazer, Enclave, Traverse, XT5, XT6) with an HVAC module update – the G17 pump was not to be replaced. PIT6505 later found a stray O-ring in it. Overspeed is P2B86, stall P2B9C.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 87

Possible causes

  • Outdated software in the module that commands the pump high
  • Impeller slowed by debris or a foreign O-ring medium
  • Worn bearing or motor in the auxiliary pump medium
  • Low voltage or poor contact at the pump connector low

Symptoms

  • Check engine light, often without any other complaint
  • Reduced cabin heat at idle or with the engine stopped

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B87

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication