P2B86
Coolant Pump A Overspeed/Air in System
P2B86 says coolant pump A spins faster than it was told to – the typical sign of air at the impeller. In GM's 2025 tables (25OBDG03A, 25OBDG04B) the filtered gap between command and feedback must stay beyond a map limit, the pump running 200 to 348 rpm too fast depending on the 300–3,480 rpm request, over 8 s of a 10 s span at more than 11 V; Type B. On GM trucks pump A is the G17 auxiliary heater pump: bulletin PIT6505 (2024–2026 Escalade, Tahoe, Suburban, Yukon) found a stray O-ring lodged in it. Ford's 2024 gasoline summary has P2B86 as overspeed/dry-run type of the cabin-heating pump. Bentley sees P2B8600 with P2B6500 on W12 models (bulletin 2066669) and checks the bleed hose. Too slow: P2B87.
Possible causes
- Air trapped in the loop after a repair or incomplete bleeding high
- Coolant loss through a leak, low level in the reservoir medium
- Foreign object such as a loose O-ring at the pump ports low
- Restricted bleed or vent hose keeping air in the system low
Symptoms
- Check engine light after the second faulty trip
- Weak or fluctuating cabin heat
- Coolant warning or gurgling noise in the heater area
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B86
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.