OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B77

Coolant Heater B Control Circuit Low

P2B77 means the command circuit of coolant heater B reads low: the line is pulled toward ground although the module drives or expects a higher level. With a second heating stage this usually costs part of the heating power rather than all of it, because stage A can still run. A short to ground in a harness branch routed along the coolant hoses, corrosion from coolant seeping into the connector or a defective input in the heater electronics are the usual suspects. No manufacturer documents P2B77 publicly, so the setting limits are unknown. CARB 13 CCR 1968.2 asks for circuit monitoring of outputs commanded by a powertrain computer. Open and high faults of heater B are P2B76 and P2B78; the engine coolant heater B family is P01EC–P01EF.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 77

Possible causes

  • Harness branch along the coolant hoses shorted to ground high
  • Coolant seepage corroding the heater connector medium
  • Heater B input shorted inside the heater electronics medium

Symptoms

  • Heating power noticeably lower than usual
  • Cabin and windows take longer to warm up
  • Possible traces of coolant at the heater connector

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B77

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication