OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B74

Coolant Heater A Control Circuit High

P2B74 is the opposite of P2B73: the command circuit of coolant heater A sits at or near supply voltage while the module expects it low, or the output stage measures excess current and shuts down. A wire rubbed through onto a 12 V feed, a crushed harness next to the heater's own supply cable or a shorted input in the heater electronics are typical. Depending on the wiring, the heater may run without a request or not at all. Designs with integrated control, such as Hanon's patent US11628706B2, add their own overheat sensing so that an unintended run does not destroy the element. No manufacturer documents P2B74 publicly. CARB wants such outputs monitored for electrical faults. Internal module and over-temperature faults have their own codes, P2DA4 and P2DA6.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 74

Possible causes

  • Command wire shorted to a 12 V circuit high
  • Harness crushed or melted near the heater supply cable medium
  • Heater electronics input shorted to its supply medium
  • Output stage of the commanding module faulty low

Symptoms

  • Coolant heater off, or running without request
  • Higher 12 V or high-voltage battery drain when parked if the heater runs on
  • Weak cabin heat in cold weather

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B74

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication