OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B73

Coolant Heater A Control Circuit Low

P2B73 is the low case on the command circuit of coolant heater A: the commanding module reads the line at or near ground when it expects a higher level. Usual reasons are a chafed wire touching body ground, coolant or water in a connector, or an input in the heater that pulls the line down. Hyundai and Kia patent US11378000B2 shows why the line carries only a request: the heater has its own controller, which switches several sheath elements one by one and protects them. No manufacturer documents P2B73 publicly, and no thresholds are known. Under CARB rules, commanded outputs like this must be watched for circuit faults. The heater then normally stays off; an electrified car may start its engine more often for cabin heat. Open circuit is P2B72, high voltage P2B74.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 73

Possible causes

  • Command wire chafed through and shorted to ground high
  • Coolant or water in the heater connector medium
  • Input of the heater electronics shorted internally medium
  • Commanding module cannot drive the line high low

Symptoms

  • Coolant heater does not switch on, weak cabin heat
  • Engine runs more often in the cold (hybrids)
  • Fuse for the request circuit may blow repeatedly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B73

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication