OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B70

Turbocharger/Supercharger A Temperature Sensor Circuit High

P2B70 is set when sensor A on the turbocharger or supercharger delivers a signal above its valid range. For an NTC thermistor this corresponds to an implausibly cold reading, the classic result of an open signal or ground wire, an unplugged connector or a short to the 5 V reference; for a PTC-type element it would indicate extreme heat. No manufacturer publishes this code, so it remains open which point of the charging system the sensor watches. CARB 13 CCR 1968.2 (e)(15) has the fault stored apart from P2B6F and from the general circuit code P2B6E. The engine computer then usually works with a substitute value, and protective functions that rely on this temperature can only act in a limited way. Checking pin fit and continuity usually finds the cause.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 70

Possible causes

  • Signal or ground wire open, connector unplugged high
  • Signal wire shorted to the 5 V reference or another voltage medium
  • Sensor element open internally medium

Symptoms

  • Warning lamp with stored code
  • Live data shows a fixed extreme value

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B70

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication