P2B6E
Turbocharger/Supercharger A Temperature Sensor Circuit
P2B6E is the general circuit code for temperature sensor A on the turbocharger or supercharger. SAE J2012 names the sensor but leaves its measuring point open, so the manufacturer decides what it watches, and no manufacturer documents this exact code publicly. The engine computer reports P2B6E when the signal is missing or implausible without being clearly low or clearly high, typically an intermittent open circuit or a corroded connector. CARB 13 CCR 1968.2 (e)(15) calls for circuit checks on powertrain input sensors and names turbocharger electronics among monitored parts. GM's patent US11060525B2 shows, using compressor outlet temperature, how such a value protects the charger by trimming boost and how a sensor fault disables that function. Out-of-range codes are P2B6F and P2B70; sensor B has P2B8F.
Possible causes
- Corroded or heat-damaged sensor connector high
- Intermittent break in signal or ground wire medium
- Temperature sensor A failed medium
Symptoms
- Warning lamp with stored code
- Implausible or jumping turbo temperature value in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B6E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.