OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B6D

Engine Coolant Flow Control Valve Position Sensor Circuit Intermittent/Erratic

P2B6D covers a position signal from the engine coolant flow control valve that drops out or jumps for short moments, even though single readings may still lie inside the valid window. This exact code appears in no public manufacturer document. In GM's 3.0 L Duramax diesel the valve sends its angle digitally via SENT; the engine computer tests that sensor for a low reading (P2B5E, under 2 %), a high reading (P2B5F, over 98 %) and plausibility (P2B60, more than 12 % deviation) and treats lost SENT communication as a separate fault, but names no intermittent code. A system using P2B6D would count unstable readings, for instance from a loose terminal, fretting corrosion or a harness that moves with the engine. Input faults of this kind must be caught according to CARB 13 CCR 1968.2 (e)(15). Coolant flow control becomes unreliable.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 6D

Possible causes

  • Loose or widened terminal in the valve connector high
  • Fretting corrosion on the signal or reference pins medium
  • Harness rubbing or flexing with engine movement medium
  • Position sensor inside the valve unstable low

Symptoms

  • Warning lamp, code often stored as intermittent
  • Temperature display or warm-up behaviour fluctuates

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B6D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication