OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B6C

Coolant Pump D Overspeed/Air in System

P2B6C means coolant pump D is spinning faster than its command would explain, the signature of an impeller moving air instead of liquid. No manufacturer documents this exact code publicly. For pump B, Bentley stores the counterpart P2B6500 on W12 models and traces it to a restricting vent hose, and Ford lists P2B65 as failure type B1 (overspeed/dry run). Patent EP2743509A1 describes how dry running and air bubbles in an electric coolant pump can be recognised from the way its speed rises and decays after a defined energy input. Typical causes are a low level after a leak, incomplete bleeding after service and air pockets that gather at high points of the loop. Bleed the circuit with the manufacturer's routine and look for leaks. A stalled pump D is P2B6A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 6C

Possible causes

  • Circuit not fully bled after filling or repair high
  • Coolant lost through a leak high
  • Vent line or bleed valve restricted, air cannot escape medium

Symptoms

  • Coolant warning or rising temperature display
  • Gurgling from the cooling circuit
  • Coolant level drops in the expansion tank

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B6C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication