P2B6B
Coolant Pump D Control Module Overtemperature
With P2B6B the integrated electronics of coolant pump D report excessive temperature, and the pump derates or switches itself off to survive. No manufacturer documents this code publicly; the equivalent for pump B is P2B64, which Ford lists as failure type 98 (system over temperature), and for pump A it is P2B9E. Heat in the driver usually builds when coolant around the pump is missing or aerated, when the motor fights a sticking impeller, or when the pump sits close to hot engine or exhaust parts. A failing power stage inside the pump can also trigger the report. CARB 13 CCR 1968.2 (e)(15) covers such output components. Check level, bleeding and free rotation before changing parts. While the pump rests, its circuit gets less flow and may run hot.
Possible causes
- Too little coolant or air at the pump high
- Sluggish impeller overloads the motor medium
- Power stage inside the pump degraded medium
Symptoms
- Warning lamp with stored code
- Pump D cuts out after longer operation and restarts after cooling
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B6B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.