P2B69
Coolant Pump D Supply Voltage Circuit
P2B69 reports that coolant pump D does not receive a usable voltage on its power feed, as distinct from the control line covered by P2B66 to P2B68. No manufacturer documents this code publicly. Ford shows the same failure type for pump B as P2B62 (type 1C, supply outside its permitted band) and for pump A as P2B9D, each checked continuously above 11 V battery voltage. A blown fuse, a relay that no longer closes cleanly, high resistance at a ground point or a weak battery can cause it, and a voltage drop test under load is the way to find them. Such output components fall within CARB 13 CCR 1968.2 (e)(15). Without adequate power the pump slows or quits, so the circuit it serves overheats more easily.
Possible causes
- Fuse blown or supply relay contacts worn high
- High resistance at the pump ground or ground point medium
- Weak battery or charging fault medium
Symptoms
- Warning lamp with stored code
- Pump D slow or inactive
- Code returns mainly at low battery voltage or high electrical load
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B69
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.