P2B64
Coolant Pump B Control Module Overtemperature
P2B64 reports that the electronics built into coolant pump B have become too hot and the pump has protected itself, usually by derating or shutting down. In Ford's 2024 gasoline OBD summary it is failure type 98 (system over temperature) of the pump B check under P261A, monitored continuously. Such overheating mostly follows a lack of cooling for the pump's own driver: coolant missing or full of air, a motor labouring against a sticking impeller, very hot surroundings near turbo or exhaust, or an ageing power stage. Because these pumps shed the heat of their electronics into the coolant they move, level and bleeding come first in diagnosis. P2B63 (stalled) and P2B65 (air) often share the root cause. Pump A has P2B9E, pump D P2B6B.
Possible causes
- Coolant level low or air at the pump, so the electronics are not cooled high
- Sluggish impeller raises motor current and heat medium
- Power stage inside the pump degraded medium
- Damaged heat shield or high radiant heat at the mounting point low
Symptoms
- Warning lamp with stored code
- Pump stops intermittently, often after long or hot drives
- Reduced cooling of the served component
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B64
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.