P2B62
Coolant Pump B Supply Voltage Circuit
P2B62 flags a supply voltage problem at coolant pump B, an electrically driven auxiliary pump with its own electronics. Ford's 2024 gasoline OBD summary files it as failure type 1C (supply voltage outside its permitted band) under base code P261A, in the check of pump B, which Ford defines as the high-temperature-loop auxiliary pump for component cooling #1. The check runs continuously, needs at least 11 V battery voltage and has a monitoring time of 5 seconds. Typical triggers are a blown fuse, a weak relay, corroded power or ground pins or a discharged battery. Faults on the control line are reported separately by P261A to P261D, the same supply fault on pump D by P2B69. With insufficient voltage the pump slows or stops, and the component it cools may overheat.
Possible causes
- Pump fuse blown or supply relay not closing properly high
- Corroded or loose power or ground connection at the pump medium
- Weak battery or charging system fault lowering supply voltage medium
- Voltage detection inside the pump electronics faulty low
Symptoms
- Warning lamp with stored code
- Auxiliary pump runs slowly or not at all
- Rising temperature of the component cooled by pump B
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B62
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.