OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B60

Engine Coolant Flow Control Valve Position Sensor Circuit Range/Performance

P2B60 checks whether the valve actually goes where it is told. On GM's 3.0 L Duramax the code sets when the gap between desired and measured position exceeds 12 % in 160 of 200 samples, only with a steady command, closed-loop control active and no coolant or outside temperature sensor fault (Type B). For LM2 trucks and SUVs GM issued 20-NA-039 and 22-NA-082 (ECM software), PIP5764 (corroded terminals at the centre actuator connector) and PIP5791, which has the valve swept from 25 to 95 % with GDS2 and then relearned. Hyundai and Kia link P2B60 to the cleaning routine of the ITM module on 1.6 T-GDI engines (23-EE-002H, 24-FL-003H, Kia ELE 285) and fix it with software.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 60

Possible causes

  • Engine control software (GM 20-NA-039 / 22-NA-082, Hyundai/Kia ITM logic) high
  • Corroded terminals at the valve actuator connector (GM PIP5764) medium
  • Valve sluggish or not learned, needs a relearn after test medium
  • Valve does not follow commands although wiring is fine low

Symptoms

  • MIL on after two drives
  • Engine temperature fluctuates or warms up slowly
  • Often no driveability complaint beyond the warning lamp

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B60

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication