P2B5F
Engine Coolant Flow Control Valve Position Sensor Circuit High
P2B5F is set when the valve position signal sits above the top of its window. The 2025 Duramax calibration (3.0 L, 25OBDG04B) treats a SENT raw value over 98 % of 5 V as implausibly high and stores a two-trip Type B code after 80 of 100 readings, sampled every 6.25 ms while the SENT link itself is healthy. A signal shorted to the 5 V reference or to supply, a moisture path in the connector or an internal sensor fault are the usual explanations; GM's 21-NA-149 lists P2B5F with the LM2 harness-chafing codes as well. Coolant flow control switches to a fallback, which can show as slow warm-up or weak cabin heat. Low counterpart: P2B5E.
Possible causes
- Signal wire shorted to the 5 V reference or to battery voltage high
- Moisture or corrosion bridging contacts in the valve connector medium
- Position sensor in the valve faulty low
Symptoms
- MIL on after two drives
- Slow warm-up or weak cabin heat
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B5F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.