OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B5D

Engine Coolant Flow Control Valve Position Sensor Circuit

P2B5D is the general circuit code for the position sensor of the coolant flow control valve, the feedback that tells the engine computer how far the rotary valve has turned. No manufacturer documents this exact code publicly. GM's 3.0-litre Duramax, whose valve reports its position digitally over a SENT link, covers the sensor through the low and high codes P2B5E and P2B5F and a separate communication check instead. A system using P2B5D would flag an implausible or missing signal that fits neither low nor high. CARB 13 CCR 1968.2 (e)(15) requires such input circuits to be checked for continuity. With no valid position the engine computer cannot regulate coolant flow and usually parks the valve in a safe position.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 5D

Possible causes

  • Loose or corroded terminals at the valve connector high
  • Signal, reference or ground wire of the sensor interrupted medium
  • Position sensor inside the valve faulty low

Symptoms

  • Check engine light on
  • Coolant flow control in fallback, warm-up or heating behaviour changed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B5D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication