OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B59

Engine Coolant Flow Control Valve Control Circuit/Open

P2B59 is the open-circuit check for the drive of the coolant flow control valve. In GM's 25OBDG04B (3.0 L Duramax) the driver reports a load resistance above 200 kΩ, meaning one of the motor wires is disconnected; 80 of 100 samples set a Type B fault. Hyundai and Kia also use the code on the 2.5-litre Theta III engines with an integrated thermal management module (ITM): bulletins 26-EM-009H (Sonata, Tucson) and Kia TSB ENG 264 (K5, Sorento, Sportage, 2024–2025) describe P2B59F0 caused by an ECU logic error and fix it with new software, noting no driveability effect. Otherwise check the connector, the harness and the valve motor. Shorts to ground and to supply are reported separately as P2B5A and P2B5B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 59

Possible causes

  • ECU judgement logic on Hyundai/Kia 2.5 Theta III (software update 26-EM-009H / ENG 264) high
  • Valve connector unplugged, loose or with a pushed-out terminal medium
  • Motor wire broken in the harness or valve motor winding open medium

Symptoms

  • MIL on, often without any noticeable driveability change
  • Valve stays in its default position, slower warm-up possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B59

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication