P2B56
B Camshaft Profile Actuator B Control Stuck On Bank 2
P2B56 completes the series: on bank 2 the second actuator of the exhaust camshaft remains engaged after it should have released. No manufacturer publishes a description of this exact code. NTN-SNR lists it as permanently active; CARB 13 CCR 1968.2 (e)(13) is the legal basis for monitoring such valve control functions. Mercedes uses the stuck-off counterparts on the exhaust side of its M176/M177 V8 (P005A/P005C), which shows that V8 sliding-cam systems monitor each bank separately. Typical reasons are a sticking solenoid, a worn shift groove or low oil quality that hinders the pin. One bank then keeps the wrong exhaust lift. Bank 1 equivalent: P2B55; stuck off: P2B52.
Possible causes
- Solenoid of exhaust actuator B on bank 2 sticking in the engaged state high
- Aged or wrong engine oil slowing the pin medium
- Worn shift groove on the exhaust cam sleeve low
Symptoms
- Check engine light on
- Bank-to-bank imbalance felt as rough idle or part-load vibration
- Lift switching locked by the engine control
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B56
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.