OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B55

B Camshaft Profile Actuator B Control Stuck On Bank 1

P2B55 flags actuator B on the bank 1 exhaust camshaft as stuck on. Even GM, whose L3B four has a second exhaust actuator and uses P2B51 for it, lists no stuck-on code for that actuator in its 2019 and 2025 tables; no other maker documents P2B55 publicly either. The fault logic can be inferred from the intake twin P2B53: a pin that does not report back to its rest position after shifting. NTN-SNR lists the code as component permanently active, and CARB (e)(13) covers it as a valve control fault. A sleeve held in one exhaust profile changes scavenging and turbo response, and the engine control normally locks out further switching. Related: P2B51 (stuck off), P2B39–P2B3B (circuit).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 55

Possible causes

  • Pin of exhaust actuator B does not retract, often from heat and deposits high
  • Solenoid stays powered because of a wiring or driver fault medium
  • Damaged shift groove holds the pin low

Symptoms

  • Check engine light on
  • Changed turbo response or reduced power
  • Possible metallic noise from the camshaft area

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B55

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication