P2B52
B Camshaft Profile Actuator B Control Performance/Stuck Off Bank 2
P2B52 is the bank 2 version for actuator B on the exhaust camshaft (B): the second shifting solenoid either does not move its cam sleeve or remains in the off position. No manufacturer documents this exact code publicly. NTN-SNR lists it in its camshaft sensor guide as actuator never active, and CARB 13 CCR 1968.2 (e)(13) requires valve control systems to be checked for failure to reach the commanded state. The closest documented analogue is Mercedes P005C on the M176/M177 V8, where exhaust solenoid 1 of bank 2 is reported faulty or jammed off (LI05.20-P-080192). Expect the exhaust lift profile to stay fixed on that bank. Bank 1 is P2B51, stuck on is P2B56, wiring faults are P2B3C–P2B3E.
Possible causes
- Actuator B of the bank 2 exhaust camshaft does not extend its pin high
- Poor contact at the actuator connector or heat-damaged harness medium
- Engine control calibration that judges the shift too strictly low
Symptoms
- Check engine light on
- Exhaust lift switching inactive on bank 2
- Possibly slightly lower power in the upper speed range
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B52
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.