OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B51

B Camshaft Profile Actuator B Control Performance/Stuck Off Bank 1

On the exhaust camshaft (B) of bank 1 the second sliding-cam solenoid is monitored by P2B51. GM applies it to the L3B 2.7-litre turbo four, whose exhaust side carries two such actuators. Its table entry mirrors the intake check: the ECM tracks the Hall feedback of the pin and treats a drop below the extending level of 55 without any shift request as an unintended firing. Four mismatches within five cylinder-event readings, engine running and supply above 11 V, store the code as Type A. In practice a pin that fires by itself can push the exhaust sleeve into the wrong profile, so exhaust lift and cylinder deactivation are blocked. NTN-SNR names it actuator never active. Intake equivalent: P2B4F; circuit faults: P2B39–P2B3B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 51

Possible causes

  • Exhaust actuator B pin releases without command, often heat-related sticking high
  • Faulty Hall feedback in the actuator or its signal line medium
  • Sludge or debris at the actuator bore hindering the pin low

Symptoms

  • MIL on immediately (Type A)
  • Exhaust lift profile no longer changes, turbo response may feel different
  • Cylinder deactivation disabled

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B51

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication