P2B4F
A Camshaft Profile Actuator B Control Performance/Stuck Off Bank 1
P2B4F covers the second profile actuator (B) on the intake camshaft of bank 1, a solenoid whose pin engages a groove on a sliding cam sleeve to change valve lift. Despite the title wording, GM's L3B 2.7-litre four (19OBDG03D, again in 25OBDG03B) uses it for the reverse case: a Hall element reports three pin states (extending 55, extended 45, retracted 68), and if the signal falls below 55 although no shift was commanded, the pin has fired on its own. Four wrong readings in five cylinder events with the engine running and more than 11 V set a Type A fault, MIL at once. The supplier NTN-SNR lists the code as actuator never active. A pin stuck out on the same actuator is P2B53; wiring faults sit under P2B33–P2B35.
Possible causes
- Actuator B pin extends without a command (sticking solenoid, weak return spring) high
- Hall feedback of the actuator delivers wrong pin states medium
- Shift groove on the cam sleeve worn so the pin is dragged out low
Symptoms
- MIL on in the first drive with the fault
- Intake lift switching locked out, less pull or higher consumption
- Cylinder deactivation no longer available
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B4F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.