P2B4E
B Camshaft Position Actuator Position Sensor B Circuit High Bank 2
P2B4E closes the group: the exhaust-side position sensor B of bank 2 sends a signal above its upper limit. Usually the sensor ground is open, the signal line is shorted to a supply, or the sensor is faulty. No manufacturer explains P2B4E publicly; the NTN-SNR code list only gives outlet sensor B, second bank, signal too high. In the CAMTRONIC family Mercedes uses on the M176/M177, the sensor is part of the actuator, so a confirmed sensor fault means a new actuator. Until then the engine runs on the fixed default cam profile on that bank, which mostly shows as a lit warning lamp and slightly more fuel use. CARB requires such circuit faults to be detected. Bank 1 counterpart: P2B4A.
Possible causes
- Sensor ground open high
- Signal line shorted to a supply medium
- Sensor faulty (actuator replacement) medium
Symptoms
- Check engine light on
- Bank 2 runs on the default cam profile
- Slightly higher fuel use
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B4E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.