P2B49
B Camshaft Position Actuator Position Sensor B Circuit Low Bank 1
With P2B49 the module reads too low a signal from position sensor B at the exhaust camshaft actuator of bank 1. A short between signal line and ground, a sensor with an internal short or a missing feed are the usual suspects. The nearest public manufacturer reference is P34BE on the Mercedes M176/M177: the sensor of exhaust solenoid 1 for CAMTRONIC, bank 1, described as shorted to ground. For P2B49 itself no manufacturer document is available. GM sets the comparable exhaust code of its L3B (P2C14) when the driver is on and the circuit shows at most 0.5 Ω to ground. Chafe points on the harness running along the cylinder head cover are worth checking first. Exhaust bank 1 high fault: P2B4A.
Possible causes
- Signal line shorted to ground high
- Sensor shorted internally medium
- Sensor feed missing low
Symptoms
- Check engine light on
- Exhaust cam lift change switched off
- Occasionally further sensor codes
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2B49
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.