P2B47
B Camshaft Position Actuator Position Sensor B Circuit Bank 1
P2B47 moves the circuit fault to the exhaust side: it concerns position sensor B on the actuator of camshaft B, bank 1. NTN-SNR's supplier code list reads camshaft B as the outlet camshaft. Mercedes-Benz, in its CAMTRONIC bulletin for the M176/M177 V8, documents exhaust-side feedback faults only for sensor A of solenoid 1 (P34BD, P34BE); a second exhaust sensor and P2B47 itself are not documented publicly by any manufacturer. The comparable GM L3B judges an exhaust sliding-cam feedback circuit (P2C12) as open from 200 kΩ upward, 4 of 5 samples, MIL on the first trip. Look for an unplugged or corroded connector and broken wires first. The intake-side counterpart on bank 1 is P2B3F.
Possible causes
- Connector unplugged or corroded, wire broken high
- Exhaust actuator sensor failed medium
- Engine control module fault low
Symptoms
- Check engine light on
- Exhaust cam lift change unavailable
- Little change in driving behaviour
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B47
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.