P2B45
A Camshaft Position Actuator Position Sensor B Circuit Low Bank 2
P2B45 means the bank 2 intake actuator's position sensor B delivers an unusually low voltage – on bank 2, which a V engine places opposite cylinder 1. A grounded signal wire is the classic cause; an internally shorted sensor or a missing supply gives the same picture. Mercedes words the low faults of this family on CAMTRONIC V8s as a ground short (P34BE and P34C2, exhaust sensor A), though P2B45 itself appears in no public manufacturer text. Because the Mercedes bulletin on these engines found heat-damaged harnesses behind the engine, that area belongs on the check list. CARB requires out-of-range low signals of such sensors to be detected. Circuit High on the same bank is P2B46.
Possible causes
- Signal wire grounded through chafing or heat damage high
- Sensor in the actuator shorted medium
- Supply to the sensor missing low
Symptoms
- Check engine light on
- Lift change on bank 2 stops working
- Possibly limp-home message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B45
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.