P2B41
A Camshaft Position Actuator Position Sensor B Circuit Low Bank 1
P2B41 reports a voltage below the permitted window from sensor B, which watches the intake actuator of bank 1. That usually points to a grounded signal line or a sensor that has failed internally. Mercedes describes the matching low fault on the exhaust side (P34BE, sensor of CAMTRONIC solenoid 1) literally as a short to ground, which shows how the family is meant; a public text on P2B41 itself is not known. GM's L3B, used here only as a comparison, sets its low codes on the sliding cam (P2C07) at 0.5 Ω or less between signal and ground while the driver is on, after 4 of 5 samples with more than 11 V supply. Chafed harness sections over the cylinder head deserve the first look. High is P2B42.
Possible causes
- Signal wire shorted to ground (chafed harness) high
- Sensor shorted internally medium
- Sensor supply interrupted medium
Symptoms
- Check engine light on
- Cam lift switching disabled
- Possibly further codes from sensors on the same supply
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2B41
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.