P2B3E
B Camshaft Profile Actuator B Control Circuit High Bank 2
P2B3E is set when the control circuit of exhaust camshaft profile actuator B on bank 2 is shorted to supply voltage. No manufacturer documents the code publicly, so the details come from the analogue: GM's L3B tests the bank 1 counterpart P2B3B while the output is off and treats 0.5 Ω or less towards controller power as a short. CARB's comprehensive component section asks for detection of shorts to high voltage on actuators of this kind. Realistic causes would be insulation damage that brings the wire against a powered line or a solenoid shorted internally. The engine keeps running, but bank 2 loses exhaust lift switching, which costs efficiency. Open and ground faults on the same actuator are P2B3C and P2B3D.
Possible causes
- Damaged insulation bringing the control wire against a powered line high
- Solenoid in exhaust actuator B shorted internally medium
- Output stage in the engine module faulty low
Symptoms
- Check engine light on
- Exhaust lift on bank 2 fixed, slightly higher consumption
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B3E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.